Documents of the I-C commission “Additive manufacturing, thermal cutting and thermal spraying”
- IW-1493-2022 «Numerical study of a plasma jet for plasma-assisted laser cutting», by S. Manzke, M. Krümmer, U. Füssel, F. Urlau, C. Leyens, A. Mahrle (Germany).
- IW-1495-2022 «Volumetric elements – strategies for geometrically complex parts», by Johanna Müller, Jonas Hensel (Germany).
- IW-1503-2022 «3-D printing of spatial products made of steel and non-ferrous alloys using electric arc heat», by Ivan Lahodzinskyi, Volodymyr Korzhyk, Viktor Kvasnytskyi, Andrij Perepichay, Andrij Grynyuk, Yevhenii Illiashenko, Sviatoslav Peleshenko (Ukraine).
- IW-1502-2022 «Influence of Heat Control on Properties and Residual Stresses of Additive-Welded High-Strength Steel Components», by Ronny Scharf-Wildenhain, André Haelsig, Jonas Hensel, Karsten Wandtke, Dirk Schroepfer, Arne Kromm, and Thomas Kannengiesser (Germany).
- IW-1504-2022 «Visualization of gas flow inside the kerf using Schlieren method and image processing in thermal cutting», by Sang-Hyun Ahn, Upendra Tuladhar, Dae-Won Cho, Young-Whan Park, Seokyoung Ah (South Korea).
- IW-1506-2022 «Application of plasma-arc atomization of compact and flux-cored wires to obtain spherical granules and powders», by Dmitry Strogonov (Ukraine).
- IW-1510-2022 «Chaboche viscoplastic material model for process simulation of additively manufactured Ti-6Al-4V parts», by S. Springer, B. Seisenbacher, M. Leitner, F. Grün, T. Gruber, M. Lasnik, B. Oberwinkler (Austria).
Documents of the II-C commission “Arc welding and filler metals”
- IIW-2238-2022 «Open gap root welding of austenitic stainless steel without the use of backing gas», by J. McNicol and C. Fink.
- IIW-2246-2022 «Simulated heat affected zone ferrite content influence on toughness for standard duplex and new duplex stainless steel grade with enhanced weldability», by A. Higelin, S. L. Manchet, G. Passot and J. Grocki.
- IIW-2239-2022 «Effect of Mo in Ni-30Cr Filler Metal on the Eutectic Phases of Weld Metal», by X. Guo, K. Xu, C. Wei, Y. L. Jiang, X. C. Lv and Y. J. Xu. IIW-2221-2022 «A renewed understanding of Ti, B, Al, O and N addition to Fe-C-Mn high strength steel weld metals», by K. Sampath.
- IIW-2224-2022 «Effect of Ni Content on Low-Temperature Toughness of Low-alloy Steel Welds», by Ma. Yiming, Lv Xiaochun, Guo Xiao and An Hongliang.
- IIW-2237-2022 «Eff ct of microstructural heterogeneities on variability in low-temperature impact toughness on multi-pass weld metal of 420 MPa offshore engineering steel», by S. Nellikode, Y-G Back, S-J Jung, I-C Kim, S-D Kim and Y-D Park.
- IIW-2245-2022 «The Effect of Micro-alloys on the Ultimate Tensile Stress of C-Mn Multi-run Weld Metal», by G. M. Evans.
- IIW-2222-2022 «Substructure & fracture toughness of 9Cr-1.5Mo-Co#V-Nb-N-B creep resisting cast steel (COST-CB2)», by S. T. Mandziej and A. Vyrostkova.
- IIW-2223-2022 «Eff ct of PWHT and welding procedure on the properties and microstructure of the weld metal matching MARBN alloys», by S. Roberts, J. Wildgoose, M. Jepson, W. Philpott, Z. Zhang and D. Allen.
- IIW-2229-2022 «Welding materials for TIG welding, surfacing and WAAM technology of titanium alloys», by S. Schwab, R. Selin, M. Voron.
- IIW-2230r1-2022 «Weldability assessment of new nanoparticle#reinforced aluminium metal matrix composites (Al-MMCs) in the FLAMINGo project», by B. Correia, A. B. Lopez, V. Ferreira, P. J. Morais.
Documents of Commission III-C “Resistance welding and related joining processes”
- IIIW-2084-22 «Development of double-sided friction stir welding of advanced high strength steel sheets», by Muneo Matsushita, Daiki Yamagishi, Satoshi Igi and Rinsei Ikeda, Japan.
- IIIW-2091-22 «Project RESURGAM: The development of friction stir welding of steel for the fabrication and under-water repair of ships», by Stephen Cater, Jonathan Martin, Santonu Ghosh, UK.
- IIIW-2086-22 «Development of solid state resistance spot joining method», by Takumi Aibara, Masayoshi Kamai, Yoshiaki Morisada, Takaaki Miyauchi, Shinichi Hasegawa and Hidetoshi Fujii, Japan.
- IIIW-2082-22 «A systematic analysis of maximum tolerable tool wear in friction stir welding», by Michael Hasieber, Felix Wenz, Michael Grätzel, James Andrew Lenard, Sebastian Matthes and Jean Pierre Bergmann, Germany, Germany.
- IIIW-2082-22 «A systematic analysis of maximumtolerable tool wear in friction stir welding», by Michael Hasieber, Felix Wenz, Michael Grätzel, James Andrew Lenard, Sebastian Matthes and Jean Pierre Bergmann, Germany, Germany.
- IIIW-2083-22 «Influence of different surface conditions on mechanical properties during ultrasonic welding of aluminum wire strands and copper terminals», by Pascal Pöthig, Michael Grätzel, Jean Pierre Bergmann, Germany.
- IIIW-2102-22 «Eff t of ultrasonic vibration on the thermo-mechanical process variables in dissimilar Al/Mg alloys FSW», by C.S. Wu, M. Zhai, T. Wang, PR China.
- IIIW-2085-22 «Examination of post heating conditions to improve CTS of resistance spot weld joints», by Taiga Taniguchi, Seiji Furusako, Shinji Kodama, Japan.
- IIIW-2099-22 «ANN versus RF in RSW monitoring», by Munkhchimeg Raash and Hee S. Chang, Republic of Korea.
- IIIW-2098-22 «Influence of Surface Irregularities in Resistance Welding», by Martin Baumgarten, Stefan Heilmann, Christian Mathiszik, Jörg Zschetzsche and Uwe Füssel, Germany.
- IIIW-2095-22 «Development of RSW technology on automotive DP steels for dynamic loading», by L. Prém, Á Meilinger, Marcel Gáspár, Hungary.
- IIIW-2110-22 «Generalization of Metallurgical and Mechanical Models for Integrated Simulation of Automotive Lap Joining», by Eric Brizes and Antonio J. Ramirez, USA.
- IIIW-2093-22 Evaluation of joint quality in resistance spot welding by energy parameters», by Yevgenia Chvertko, Ukraine.
- IIIW-2108-22 «Resistance Spot-Welding of Fe-Al Using Interlayer Technology», by B. Lara, L. Amanuel, R. Giorjao, and A. Ramirez, USA.
- IIIW-2092-22 «Effect of process parameters on the liquid metal embrittlement (LME) cracking in the resistance spot welding of zinc-coated steels», by Woo-Sung Jin, Arun Lalachan, Il-Guk Jo, Changwook Ji, Yeong-do Park, Republic of Korea.
- IIIW-2094-22 «High cycle fatigue behaviour of a resistance spot welded advanced high strength steel», by Bindu Pal, Murugaiyan Amirthalingam and S. Ganesh Sundara Raman, India.
- IIIW-2105-22 «Reduction of LME cracking severity in dissimilar resistance spot welded third generation advanced high strength steel with associated mechanisms», by M. Patel, M. Shojaee, A. R. H. Midawi, O. Sherepenko, H.Ghassemi-Armaki, E. Biro.
- III-2096-22 «Thermal influence of resistance spot welding on nearby overmolded plastic-metal joints», by Jan Wippermann, Gerson Meschut, Wikentji Koschukow, Alexander Liebsch, Maik Gude, Steven Minch, Björn Kolbe, Germany.
- III-2089-22 «Numerical study on thermal behavior in Cu wire to Kovar foil resistance micro-welding with a triple electrode configuration», by Nannan Chen, G. Wu, Min Wang, X. Hua, Z. Wang, Yi Wei, PR China.
- III-2109-22 «Shifting Timing and Location of Shoulder LME Cracks with Welding with Radius Faced Electrodes or Expulsion Conditions», by S. Song, M. Patel, O. Sherepenko, E. Biro, Canada.
- III-2106-22 «Successive friction stir processing/ transient liquid phase bonding (FSP/TLP) of AISI304 stainless steel», by R. Bakhtiari, H. Nikukar ,M. Divandari, E. Biro, Canada.
- III-2100-22 «Application of electrical power measurements for process monitoring in ultrasonic metal welding», by Florian W. Müller, Chun-Yu Chen, Alexander Schiebahn, Uwe Reisgen, Germany.
- III-2104-22 «Influence of the temperature conditions on the joining quality during refi friction stir spot welding of aluminium», by Dennis Lauterbach, Nima Eslami, Alexander Harms, Daniel Keil, Klaus Dilger, Germany.
- III-2107-22 «Infl of cold sprayed Zn interlayer on microstructure and mechanical properties of refill friction stir spot welded dissimilar Al/Mg joints», by Xinyu Liu, Zhikang Shen, Wenya Li, PR China.
- III-2103-22 «Hybrid Friction Eutectic Bonding (HFEB) of aluminium and copper», by Anna Regensburg, Germany.
- III-2087-22 «Friction stir lap welding of plastic to metal using adjustable tool, by Yefei Gao, Naotsugu Yamamoto, Jinsun Liao, Yoshiaki Morisada and Hidetoshi Fujii, Japan.
- III-2101-22 Non-destructive evaluation of the Friction Stir Welding process, generalizing a deep neural defect detection network to identify internal weld defects across different Aluminum Alloys», by P. Rabe, A. Schiebahn, U. Reisgen, Germany.
- III-2088-22 «Material fl and thermal-mechanical analysis of Al/steel friction stir lap joining process», by Ninshu Ma, Peihao Geng, Hidetoshi Fujii, Japan
